V400 Heater and Controller Combination
SunSwitch Varma V400 Horizontal 4kW heater
• Twin element, broad-throw design
• IPX5 rating
• Easy to fit tilt and swivel mounting bracket
• Gold quartz halogen elements for near-neutral light output
• Optically designed parabolic reflectors for maximum heat output
• Rugged powder-coated mild-steel enclosure
Ideal for heating in workshops, warehouses and garages, these twin element horizontal array infrared heaters provide a substantial, broad throw of heat, and are ideal for zone heating in most industrial environments. Each infrared element has it’s own mains flex which can be connected together or switched separately. IPX5 rated so suitable for use in damp or wet areas. A thoroughly proven and popular product. The 3kW version can operate from a standard 13 amp outlet.
Replacement element: SP990510 (3kW)
or alternative AMBER LIGHT: SP990517 (3kW)
CC3 4kW Energy-saving Comfort Controller – Manual
• Convenient 10-step instant heat adjustment
• Saves energy when heat is turned down
• IP65 rated – for use indoors, outdoors or in humid environments
• Easy to install
• Can be run from a 13A plug for loads below 3kW
• Soft-start – extends life of infrared heater elements by up to 30%
• Optional temperature, PIR and time based control (see below)
• Works with any SunSwitch heater/s up to a maximum overall load of 4kW
This CC3 Energy-saving Comfort Controller enables the heat output from up to 4kW of SunSwitch infrared heaters to be manually adjusted for complete comfort control, while also providing a soft-start to maximise element life. The advanced phase angle circuit has been specially developed for use with quartz halogen heating. When turned down, the CC3 also reduces energy consumption which, in the long run, more than offsets the purchase price.
The CC3 features a soft-start circuit that brings the heaters on gently. This optimises the life of the infrared elements and eliminates nuisance tripping caused by inductive current rush. Optional accessories that automate control and provide additional energy-savings include temperature and PIR sensors. With the optional temperature sensor, if the ambient temperature exceeds the set point, the heater/s are switched off. The PIR volt-free contact can also be wired to a conventional heating time programmer so the heating will switch on and off automatically at scheduled times.
