Skip to content
Fully automatic control system for animal & reptile basking zones up to 6kW, which means this control systems can control 4x 1.5kW heaters, or 4x 1.3kW heaters, or 3x 2kW heaters simultaneously within the same enclosure. The heat output can be easily adjusted in fine increments to provide the optimal temperature required.
£555.00 £666.00 inc. VAT
Or call us on 01424 533215
Fully automatic control system for animal & reptile basking zones up to 6kW.
Heat output can be adjusted in fine increments to provide the optimal temperature.
Daily on and off times are set using the CC3 7-day time programmer.
A high limit safety cut-out will turn the heaters off if the ambient temperature inside the enclosure reaches a user-defined pre-set level.
Note: when the heat output is reduced, energy consumption is also lowered.
| Maximum load | 6kW |
| Power supply | 230 – 250Vac ~50-60Hz. |
| Ingress Protection | IPX5 (moisture & splashproof) |
| Dimensions | 275 x 80 x 200mm (wdh) |
| IP rating | IP65 |
| Mains cable | 4mm² |
| Power supply | 230 – 250Vac ~50-60Hz. |
| On periods | Up to 3 per day |
| Dimensions | 147 x 30 x 85mm (wdh) |
| IP rating | IP30 |
| Controller cable | 2 wire low voltage pair |
| Type | NTC Thermistor |
| Accuracy | ±0.2°C |
| Dimensions | 113 x 50 x 110mm (wdh) |
| IP rating | IP65 |
| Controller cable | 2 wire low voltage pair |
(Please note – this product is intended for professional installation)
Complete the form below to arrange a consultation with one of our experts.
Or call us on 01424 533215
